CPCS Telescopic Handler – All sizes exc. 360 slew

  • Start date
    08-04-2024
  • End date
    12-04-2024
  • Course duration
    5 Days
CPCS Telehandler

Aims and Objectives

  • To ensure you have a thorough understanding of the relevant operational and safety requirements applicable to Telescopic Handlers, working in the construction industry and allied environments in accordance with CITB recommendations.
  • Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
  • Name and explain the purpose of principle components, the basic construction, controls and terminology.
  • Confirm with Manufacturer’s requirements as per the operators handbook, other types of information source and the relevant regulations and legislation.
  • Undertake all pre-use checks.
  • Configure and ready for travel (site and highway).
  • Travel over rough, undulating ground, steep inclines and level surfaces – loaded and unloaded.
  • Manoeuvre in confined spaces (with and without loads).
  • Configure and set for lifting and transferring duties.
  • Explain actions required for hazards, underground and overhead services.
  • Lift and remove various loads up to full extension and working height of the telescopic handler.
  • Transfer and place loads accurately at given locations.
  • Place and remove loads from a vehicle.
  • Maintain safe working situations.
  • Maintain safe and tidy working areas.
  • Carry out shut down and securing procedures.
  • Explain the loading and unloading procedures for machine transporting.

Pre-Requisites

Delegates must have passed the Health, Safety and Environment test within the past 2 years before booking onto a CPCS Technical Test.

On the Day

All visitors must report to reception on arrival at the time specified and follow site safety rules at all times.

Teas and coffees are available free of charge, but there is no other catering facility on site, so delegates need to provide any further refreshments/meals they may require throughout the day.

Candidates must bring and wear their own 3 point PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Method

Training: The course is centred around the practical test and clients will be given maximum time training on the machine they will use in the test, from 8.30 am – 4 pm. Support will be given with the theory questions if needed, but we would anticipate clients will have revised for the theory prior to arriving at the centre. (Full details of both theory questions and practical test specs are available from CITB website.)

Test: You will be tested with a theory and practical test using CPCS standards. To attain the Red Card you must pass both the theory and practical tests.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board:

The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.

CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

Outcome

On successfully completing the test you will receive a Red CPCS Trained Operator card that is valid for 2 years.

During these 2 years you must work towards achieving your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.


GETTING IN TOUCH

Click here to email: info@pglmidlands.com
Call: 0121 240 0375

Choose your date and location

Your Details

Consent and Statements

  • I would like to stay up to date on upcoming courses, information and exclusive offers from PGL Midlands.
Untitled design 14
Price (GBP) £1450.00 Excl. VAT
  • Course / group name
    CPCS Telescopic Handler - All sizes exc. 360 slew / Telescopic Handler-Kirkby in Ashfield-8th-12th April
  • Location
    Nottingham
    Summit Close
    NG17 8GJ, Kirkby in Ashfield
    Nottingham
    United Kingdom
  • Contact
    Call: 0121 240 0375
    email: info@pglmidlands.com

Thank you for sending your booking!

Description

CPCS Telehandler

Aims and Objectives
To ensure you have a thorough understanding of the relevant operational and safety requirements applicable to Telescopic Handlers, working in the construction industry and allied environments in accordance with CITB recommendations.- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
– Name and explain the purpose of principle components, the basic construction, controls and terminology.
– Confirm with Manufacturer’s requirements as per the operators handbook, other types of information source and the relevant regulations and legislation.
– Undertake all pre-use checks.
– Configure and ready for travel (site and highway).
– Travel over rough, undulating ground, steep inclines and level surfaces – loaded and unloaded.
– Manoeuvre in confined spaces (with and without loads).
– Configure and set for lifting and transferring duties.
– Explain actions required for hazards, underground and overhead services.
– Lift and remove various loads up to full extension and working height of the telescopic handler.
– Transfer and place loads accurately at given locations.
– Place and remove loads from a vehicle.
– Maintain safe working situations.
– Maintain safe and tidy working areas.
– Carry out shut down and securing procedures.
– Explain the loading and unloading procedures for machine transporting.
Pre-Requisites
Delegates must have passed the Health, Safety and Environment test within the past 2 years before booking onto a CPCS Technical Test.
On the Day
All visitors must report to reception on arrival at the time specified and follow site safety rules at all times.
Teas and coffees are available free of charge, but there is no other catering facility on site, so delegates need to provide any further refreshments/meals they may require throughout the day.
Candidates must bring and wear their own 3 point PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.
The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.
Method
Training: The course is centred around the practical test and clients will be given maximum time training on the machine they will use in the test, from 8.30 am – 4 pm. Support will be given with the theory questions if needed, but we would anticipate clients will have revised for the theory prior to arriving at the centre. (Full details of both theory questions and practical test specs are available from CITB website.)
Test: You will be tested with a theory and practical test using CPCS standards. To attain the Red Card you must pass both the theory and practical tests.
The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Examination Board
:
The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.
CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).
Outcome
On successfully completing the test you will receive a Red CPCS Trained Operator card that is valid for 2 years.
During these 2 years you must work towards achieving your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.
Call for details : 0121 240 0375
Menu